Showing results: 526 - 540 of 627 items found.
-
RDP-20C -
TEGAM Inc.
TEGAM''s Humitran duct probes provide a reliable, accurate, and low cost method for monitoring relative humidity plus temperature. Solid state sensors supply excellent sensitivity, fast response and long term stability. Simple hook up and linearized output permit interfacing with most display or control devices. Model RDP-20C outputs a 4-20 mA current loop for long virtually unlimited cable distances.
-
Mantracourt Electronics Ltd
Mantracourt’s digital weighing indicator and panel meter modules are compatible with a wide range of sensors and transducers, including volts, amps, temperature, frequency, speed, load, force, pressure, torque, LVDT, RVDT and many more. The digital architecture offers simple one-pass calibration and fast setup.
-
779781-02 -
NI
100 S/s/channel, 4-Channel C Series Universal Analog Input Module - The NI‑9219 is designed for multipurpose testing. With the NI‑9219, you can measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors, as well as make quarter-bridge, half-bridge, and full-bridge current measurements, with built-in voltage and current excitation. Each channel is individually selectable, so you can perform a different measurement type on each channel.
-
785994-01 -
NI
100 S/s/channel, 4-Channel C Series Universal Analog Input Module - The NI‑9219 is designed for multipurpose testing. With the NI‑9219, you can measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors, as well as make quarter-bridge, half-bridge, and full-bridge current measurements, with built-in voltage and current excitation. Each channel is individually selectable, so you can perform a different measurement type on each channel.
-
FLIR MR77 -
Teledyne FLIR
The FLIR MR77 has everything you need for moisture remediation or HVAC: a pinless moisture sensor and pin probe, a temperature and relative humidity sensor, and an IR thermometer. The meter includes Bluetooth® for remote viewing and sharing, as well as METERLiNK® technology to wirelessly embed readings into radiometric infrared images on compatible FLIR thermal cameras. Made with field-replaceable sensors, the MR77 is engineered to help you get more done in less time.
-
CRY2100 Series -
Hangzhou JiGao Electroacoustical Science and Technology Co.,Ltd
CRY2110 / 2112 noise sensor is a new type of noise testing equipment for industrial applications. Product performance implements IEC61672-1 / 2 standard and GB / T3785-1 / 2 standard. CRY2110 / 2112 noise sensors are small in size and equipped with precision measurement microphones to ensure good temperature and humidity characteristics. The sensor's integrated signal conditioning, amplification, sampling, and calculation circuits can provide a dynamic range of 110dB and measure environmental noise as low as 25dBA.
-
90332 -
HITEC Sensor Solutions Inc.
The 90332 digital FM telemetry systems is designed to be used with full-bridge, strain gage sensors. The system features a miniature transmitter powered by a simple 9V battery, and a remote receiver capability of receiving the digital transmission over long distances. The digital technique eliminates many of the problems associated with traditional analog frequency modulated telemetry systems. Improvements with a digital technique include elimination of ripple, temperature drift characteristics, and higher signal resolution.
-
SL1068B -
Keysight Technologies
The Measurement & Control Module SL1068B is a rack-mount measurement module which provides voltage outputs for analog signaling – useful e.g. for the emulation of temperature sensors or the controlling of regulation vents with voltage input with 8 channels. The module can be used either as a stand-alone device or as extension for a Scienlab Battery Test System.
-
9545-A -
TSI Inc.
The VelociCalc® Air Velocity Meter 9545-A is like having multiple meters for the price of one. This meter simultaneously measures and data logs several ventilation parameters using a single probe with multiple sensors. It measures velocity, temperature and relative humidity; and calculates flow, wet bulb and dew point temperature. Ideal for optimizing HVAC system performance, commissioning, plant maintenance, critical environment certification and duct traverses. The 9545 model has an articulated probe.
-
SAVER -
Lansmont Corporation
SAVERs are “best in class” Field Data Recorders that can measure and store tens of thousands of events. The data you collect allows you to assess and characterize the dynamic characteristics of various environments. SAVERs are self-powered instruments that provide 16-bit resolution, an internal tri-axial accelerometer, temperature and humidity sensors, and USB connectivity. They provide time domain waveforms with pre-trigger, SRS (Shock Response Spectra), PSD (Power Spectral Density), and optional GPS spatial and situational data awareness.
-
Instron
The Instron 2650 Series Biaxial Extensometers are ideally suited for testing a wide range of materials, including polymer matrix composites, metals, and plastics over a range of temperatures. Two sensors measure axial strain on opposite sides of the specimen. Versions are available which provide either a single averaged axial output or 2 independent axial outputs. The extensometers meet the calibration requirements of ASTM E83 class B1, ISO 9513 class 0.5, and ISO 527.
-
SoilWatch10 -
Pino-Tech
SoilWatch 10 is a soil moisture sensor which allows measuring relative water content in the soil. Our sensor does not have any exposed electrodes that usually corrode in resistive sensors. Whats more the reads will almost not drift over time or with temperature changes. Our sensor will give the same readings regardless of supply voltage. The sensor is weatherproof. It can be buried in soil for extended periods of time without adverse effects on accuracy or reliability. Designed to work with Arduino.
-
IPC-Series -
Isabellenhütte Heusler GmbH & Co. KG
The IPC series are digital, precise phase current sensors with a wide range of possible applications. Different designs with different measurement ranges between 100 Ato 2,500 Aare available.Because of this modular principle of the shunt-based phase current sensor, we are able to offer our customers a quick solution for the requirements. Due to their high bandwidth, high linearity and very low temperature coefficients, our modules are perfect for the high-precision current measurement in modern control systems and converters.
-
SSG-RP Series -
Falcon Electric, Inc
*-30°C to 65°C temperature range The SSG-RP UPS is agency-certified (UL, cUL, CE) to operate reliably in ultra-wide temperature environments. All 120V models are also UL 508 listed.*Long-life UPS: true on-line, industrial Tested and designed with robust components and materials, the SSG-RP assures reliable operation and a long service life in very demanding temperature environments. It is a true on-line industrial UPS.*Extreme temperature batteries. The batteries used inside the UPS were specifically selected due to their wide operational range of -40°C to 80°C. They have a 10-year life at 25°C.*Extended battery banks The battery banks are easily expandable to provide minutes to hours of extra battery runtime.*Available options / Advanced communications. NEMA 3R-rated enclosures, environmental protection, remote UPS management, environment sensors, relay cards – and much more.*Falcon – recognized for quality and reliability Falcon Electric is a recognized authority in industrial UPS solutions. Our technical expertise assures you find the right solution – the first time.
-
781027-01 -
NI
Non-Enclosed, 100 S/s/channel, 4-Channel C Series Universal Analog Input Module - The sbRIO‑9219 is designed for multipurpose testing. With the sbRIO‑9219, you can measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors, as well as make quarter-bridge, half-bridge, and full-bridge current measurements, with built-in voltage and current excitation. Each channel is individually selectable, so you can perform a different measurement type on each channel. Non-enclosed modules are designed for OEM applications.
